Skip to content

DubaiMon,Tue,Wed,Thu,Fri,Sat 09:00 to 18:00

+971 50 494 8667 WhatsApp info@meautodoors.com

Case study

Polycarbonate Rolling Shutter in Al Quoz, Dubai

Al QuozRolling Shutter Doors

Mount Everest Automatic Doors installed a wide polycarbonate rolling shutter at a commercial unit in Al Quoz, Dubai.

Polycarbonate Rolling Shutter in Al Quoz, Dubai
Al Quoz, Dubai

What we did

Our team installed a polycarbonate rolling shutter at a commercial unit in Al Quoz, Dubai. The shutter closes a wide opening between the entrance area and the workshop behind it. The photo shows a large clear slatted shutter filling the opening, framed by a red surround and a white bottom edge. Spotlights hang on a track above, and the interior beyond the slats can be seen. A glass door and a side door sit to the left and right of the opening, and a cable lies across the floor. A polycarbonate rolling shutter uses clear or tinted slats that roll up into a box above the opening, so the space behind stays visible while the entrance is secured. A typical installation includes fitting the side guides, mounting the roller box, hanging the slats, connecting a tubular motor and setting the open and closed limits. Owners choose this style where light and visibility matter as much as security. Before any installation, the opening is normally measured, the structure is checked for a solid fixing surface, and the power supply and access for controls are confirmed. After fitting, the equipment is run through full cycles, the limits and safety devices are set, and the owner is shown how to operate it and how to release it manually if needed. Owners should wipe the slats with a soft cloth and mild soap rather than harsh solvents, keep the side guides clear of grit, and listen for scraping as the shutter moves. If the shutter stops short of its limits or travels unevenly, the limit settings or guides usually need a quick adjustment. Good access to the equipment, clear communication and tidy work matter as much as the parts themselves. Customers across the UAE depend on doors, gates and shutters working every day in heat, dust and humidity, so planning for regular servicing is a sensible habit that protects both the equipment and the people who use it. Our team at Mount Everest Automatic Doors, Dubai, works on site to check the opening, agree the solution with the owner, carry out the work and test the equipment before leaving. If you have a similar door, gate or shutter in Al Quoz, Dubai, you can contact Mount Everest Automatic Doors, Dubai, for an assessment.

How a job like this runs

  1. 1
    Enquiry

    Call us or message on WhatsApp.

  2. 2
    Photo of the opening

    Send a photo and the rough width and height.

  3. 3
    Site visit

    We visit and measure the opening.

  4. 4
    Written quote

    You receive the scope in writing.

  5. 5
    Installation

    We fit, adjust and test the door or gate.

  6. 6
    After-care

    Servicing and repairs after handover.

01Selected work

More work like this

All projects

02Services

More we do besides this

Supply, installation, repair and maintenance, from one team. Pick the family that matches what you have.

  • Quote from a photo

    One photo of the opening and one of the motor. We reply with questions or a price range, then book a free visit.

    Send a photo
  • Door or gate not working?

    Pick what it is doing. You get a safe first step and the fastest way to book a repair.

    Open the fault finder
  • Checklists before we visit

    Short guides from the technicians: what to check, what to photograph, what to ask a supplier.

    Get the checklists

Tell us about the door or gate.

+971 50 494 8667

Call, message us on WhatsApp, or leave your number and we will call you.

What is it?

Prefer WhatsApp? Message us instead