Hormann supplier, installation & repair in Dubai

It depends on the door type, the opening and how much needs preparing, so the written quote after our free site visit sets the schedule. A simple replacement in a clear opening is usually quicker than a new automatic sectional door that needs track fixing, springs balanced and an opener commissioned. Extra work such as lintel reinforcement, wiring for the motor or removing an old door adds time. For villas in Dubai Hills, Arabian Ranches or Tilal Al Ghaf, we also allow for community working hours and access rules. Share your opening size and photos through the Send a photo page and we can plan the visit more accurately.

Heat is a common trigger, but it usually exposes an existing weakness rather than causing the fault alone. Above 45 C, metal tracks, springs and lubricants behave differently, and a door that was slightly stiff in winter can load the motor enough to trip its force limit or overheat. Fine sand in the rollers and dried grease add friction. A safety sensor knocked out of line by sun glare or movement can also halt travel. Disconnect the opener and lift the door by hand: if it feels heavy, suspect springs or tracks. Our technicians can check balance, rollers and the motor settings on a site visit.

Often yes, particularly if the new door changes the look of the facade or you rent the villa. Tenants should ask the landlord first, and owners in master communities may need to check with their Owners Association or community management, because colour, material and style can be controlled. Approvals may be needed from the authority too, so ask your community management what applies to your plot. We cannot confirm rules for a specific community, but we can supply drawings, colour options and photos of the proposed door to support your request. Start with the free site visit so the submission matches what will be fitted.

Sometimes, but the door must be in sound condition first. A motor is built to move a well-balanced door, not to compensate for worn springs, bent tracks or seized hinges. We check balance by hand, inspect the rollers and panels, and confirm there is enough headroom and side room for the opener rail. Many older up-and-over doors are better replaced, because adding power to a poor door shortens the life of the motor. If the door passes inspection, we install the opener, safety sensors and remotes, then test reversing. Send photos of the door and ceiling space to help us advise.