Skip to content

DubaiMon,Tue,Wed,Thu,Fri,Sat 09:00 to 18:00

+971 50 494 8667 WhatsApp info@meautodoors.com

Case study

Nice Gate Barrier Repair in Ras Al Khaimah, UAE

Ras Al Khaimah, UAEGate Barrier Parking Saver

Mount Everest Automatic Doors repaired a Nice brand gate barrier at a property in Ras Al Khaimah, UAE.

Nice Gate Barrier Repair in Ras Al Khaimah, UAE
Ras Al Khaimah, UAE

What we did

Our team repaired a Nice brand gate barrier at a property in Ras Al Khaimah, UAE. The barrier was opened up on site so the control board and wiring could be tested and the fault found. The photo shows an orange Nice barrier cabinet in a gated entry, with its white boom lying on the ground beside it. Tools, a toolbox, a digital meter, a spray can and a control board in its case are laid out on the paving while a technician stands nearby. A gate barrier uses a motorised cabinet that lifts and lowers a boom to control vehicles at an entrance. Repair work often involves inspecting the control board, checking the wiring with a meter, testing the motor and the boom balance, and replacing worn parts. When the cabinet is opened and the boom is removed, each part can be checked in turn. A repair visit typically begins with a conversation about the symptoms, followed by a visual inspection and testing of the moving parts, wiring and controls. Where a part has worn out it is replaced, and the equipment is then run through repeated cycles to confirm the fault is gone. Noting what was found also helps the owner plan future servicing. Owners should keep the cabinet door closed and the base free of leaves and debris, make sure the boom is balanced and the safety devices work, and report any barrier that stops mid travel or fails to respond to the remote or reader. Using a meter to test the supply and the board saves time in finding the real fault. Good access to the equipment, clear communication and tidy work matter as much as the parts themselves. Customers across the UAE depend on doors, gates and shutters working every day in heat, dust and humidity, so planning for regular servicing is a sensible habit that protects both the equipment and the people who use it. Our team at Mount Everest Automatic Doors, Dubai, works on site to check the opening, agree the solution with the owner, carry out the work and test the equipment before leaving. If you have a similar door, gate or shutter in Ras Al Khaimah, UAE, you can contact Mount Everest Automatic Doors, Dubai, for an assessment.

How a job like this runs

  1. 1
    Enquiry

    Call us or message on WhatsApp.

  2. 2
    Photo of the opening

    Send a photo and the rough width and height.

  3. 3
    Site visit

    We visit and measure the opening.

  4. 4
    Written quote

    You receive the scope in writing.

  5. 5
    Installation

    We fit, adjust and test the door or gate.

  6. 6
    After-care

    Servicing and repairs after handover.

01Selected work

More work like this

All projects

02Services

More we do besides this

Supply, installation, repair and maintenance, from one team. Pick the family that matches what you have.

  • Quote from a photo

    One photo of the opening and one of the motor. We reply with questions or a price range, then book a free visit.

    Send a photo
  • Door or gate not working?

    Pick what it is doing. You get a safe first step and the fastest way to book a repair.

    Open the fault finder
  • Checklists before we visit

    Short guides from the technicians: what to check, what to photograph, what to ask a supplier.

    Get the checklists

Tell us about the door or gate.

+971 50 494 8667

Call, message us on WhatsApp, or leave your number and we will call you.

What is it?

Prefer WhatsApp? Message us instead