Skip to content

DubaiMon,Tue,Wed,Thu,Fri,Sat 09:00 to 18:00

+971 50 494 8667 WhatsApp info@meautodoors.com

Guides11 min read

Gate Motor Spare Parts in Dubai: A Brand Support Map for Boards, Remotes and Arms

Short answer: Spare parts for a gate motor in Dubai are easiest to find when the brand is widely installed, the model is still current or has a known successor, and you can give the supplier the…

BFT sliding gate motor with two remote controls on top beside a metal gate in Al Warqa, Dubai

Short answer: Spare parts for a gate motor in Dubai are easiest to find when the brand is widely installed, the model is still current or has a known successor, and you can give the supplier the exact label. Boards and remotes are the parts most often needed and the most model specific. Racks, wheels, arms and photocells are usually the easiest to match. Photograph the motor label and the board before you ask anyone for a part.

In short

  • The motor label is the key to every parts enquiry. Photograph it before anything else.
  • Control boards and remotes are model and radio system specific. Do not buy one by guess.
  • Wear parts such as rack, pinion, wheels, arms and batteries are usually simpler to match.
  • A dead board is not always a reason to replace the motor, and an old motor is not always worth a new board.
  • We are an independent installer and service company, not a dealer for any of these brands, and parts availability varies by model.

What decides whether a gate motor part is easy to get in Dubai?

Four things: how many of that brand are installed here, how old the model is, whether the part is standard or proprietary, and whether you can identify it. A common brand with a current model has the best odds. An unlabelled motor from an installer who has left the market has the worst.

No neutral list can promise stock, because stock changes week to week and by supplier. This page is a map of what to ask, brand by brand, and of the parts that matter most. It does not claim that any supplier holds any item.

BFT sliding gate motor with two BFT remote controls on top beside a metal gate in Al Warqa, Dubai
BFT operator with remotes ready for handover in Al Warqa, Dubai. The label and board inside the cover are what a parts enquiry starts from.

Which parts fail first on a Dubai gate, and what should I send?

Dubai conditions are hard on electronics and moving parts. Summer heat sits inside control boxes, fine sand wears racks and wheels, and power cuts and surges damage boards and receivers. Use this table to match a symptom to a part class and to the photo to take.

Part class, what it does, signs of trouble, what to send

Part classWhat it doesSigns of troubleWhat to send us
Control boardRuns the motor, reads limits and safety inputsGate dead, flashing lamp, random behaviour after a power cut or stormPhoto of the board and its printed model name, plus the motor label
Receiver and remotesReceives the radio signal from handsetsShort range, remote works only next to the gate, one remote deadPhoto of the remote and the receiver, and the number of remotes
Motor and gearboxTurns the pinion and moves the gateHums without moving, gets hot, noisy gearsMotor label and a short video of the sound
Rack and pinionCarries the gate along the trackGate jerks, stops at the same spot, visible worn teethPhoto of the rack and pinion, and the gate length
Arm or hinge setOpens a swing leafLeaf drifts, arm leaks or bends, uneven travelPhoto of the arm at both ends and the pillar bracket
Photocells and safety edgeStop the gate when something is in the wayGate reverses or will not closePhoto of both photocells and the wiring box
Battery and chargerSupply when mains is lostGate dies in a power cutPhoto of the battery label and charger

What does each brand's parts picture look like?

The table below is built from what we see on jobs and what each brand says about itself. It describes the brand and the common faults we are called to, not stock. Brand links open our own page on each one.

Brand support map: what to ask first

BrandWhat it isCommon calls we seeAsk or photograph first
CAMEItalian group: gate motors, barriers, bollards, readers, remotes, parking equipmentCrawling or humming gates, gates that will not close, boards damaged by moisture or a surgeMotor label, board, receiver type
BFTItalian automation company in the Somfy GroupGate stops and reverses, worn rack, failing encoder, blocked photocellMotor label, encoder wiring, obstruction setting
LiftMasterChamberlain Group brand: garage openers, commercial and gate operators, many with phone connectivityOpeners that reverse early, sensors, handset and receiver problems, belts and chainsOpener label, handset, receiver
SomfyFrench maker of motors for shutters, gates and garage doorsShutters stopping at the wrong point, pairing and replacing handsetsHandset type, motor label
NiceItalian maker: swing and sliding gates, sectional doors, barriers, shuttersWear from daily family use, boards, remotesControl unit label, remote model
FAACItalian company near Bologna: gate and barrier automation, doors, parkingHydraulic units that leak or lose pressure, drifting gates, boardsHydraulic unit label, leak photo
BenincaItalian maker that sells mainly through professional installersGates that stop mid travel, boards and receivers that no longer respondBoard model, receiver, gear photo
DEAItalian maker with control electronics developed in houseGate closes then reopens, drift on slopesBoard label, gate slope, brake or release
Roger TechnologyItalian maker of brushless automation, including heavy sliding gatesFalse obstruction stops from stiff track or worn wheelsEncoder, wheels, gate weight
Hi-LifeName on UAE gate and door automation, often with limited documentationUnknown model, original installer goneEvery label, wiring photo, board close-up

Other brands that reach us include Life, VDS, Sommer and Marantec. The method is the same: photograph the label, the board and the remote. Our gate motors page lists what we install and service.

How do I identify an unknown gate motor?

  1. Open the motor cover safely. Switch off the power at the isolator first. Do not touch live terminals.
  2. Look for the label. It is usually on the motor housing or on the base. Photograph it flat and in focus.
  3. Photograph the board. The model is often printed beside the connectors. Take one wide photo and one close one.
  4. Photograph a remote and the receiver. Note whether the remote has a battery inside, and how many buttons it has.
  5. Measure the gate. Width, height, leaf count and weight if known. For a sliding gate, note the rack type.
  6. Note the fault. What happens, when it started and whether there was a power cut or storm before.

If you cannot open the cover safely, stop and call a technician. A gate motor is mains powered, and a sliding gate leaf can be heavy.

Timeline of a gate motor parts enquiry: photograph the label, identify the model, identify the part class, check for a successor, confirm compatibility, order, test
Figure 1. A suggested order for a gate motor parts enquiry.

Should I repair the board, replace the board or replace the motor?

It depends on the age of the motor, the state of the mechanics and whether a compatible board exists. A dead board on a motor with a healthy gearbox and a sound gate is often worth fixing or replacing. A dead board on a motor that is already noisy, worn and out of production is a point to think about a new unit.

Two of our answers cover this in detail. See Dubai BFT gate board dead, fix it or buy a new one, and is it worth repairing an old CAME gate motor or should I upgrade.

What about remotes and receivers?

Remotes belong to a radio system. A remote from the same brand is not automatically compatible with your receiver, and a cheap universal remote may not follow the security rules your receiver expects. The safe route is to give the supplier the remote and receiver photos. For examples from specific brands, see Sommer spare remotes and replacing a lost LiftMaster handset.

Motorised sliding gate closed across a villa driveway entrance
A motorised sliding gate closed across a villa driveway entrance. A rack and a motor sit behind the gate line, and both wear with daily use.

How do conditions in Jumeirah, Al Warqa and Arabian Ranches change the picture?

  • In Jumeirah, sea air and humidity attack fixings, board contacts and covers. Sealed covers and clean dry control boxes help.
  • In Al Warqa and other inland communities, sand and dust load racks, pinions and wheels, and power surges are a common cause of dead boards.
  • In Arabian Ranches and similar villa communities, many gates are older and the installer may be unknown, so identifying the motor comes first.

Our BFT sliding gate motor installation in Jumeirah shows a villa gate fitted with a protected motor, a gear rack along the bottom and a manual release so the owner can move the gate by hand if the power fails.

BFT sliding gate motor in a dark grey cover with gear rack and grey junction boxes beside a brown sliding gate in Jumeirah, Dubai
BFT sliding gate motor installed in Jumeirah, Dubai.

How does Mount Everest Automatic Doors handle parts?

Mount Everest Automatic Doors is an independent installer and service company based in Al Quoz, Dubai. We are not the manufacturer and not an authorised dealer for these brands. A technician visits free before anything is fitted, reads the labels, traces the wiring and tests the gate. We then give a written quote after seeing the job. If a part is no longer made, we tell you, and talk through repair or replacement. See our automatic sliding gates and automatic swing gates products, and our gate motors service page.

What to send us

  • A flat, in focus photo of the motor label.
  • A wide and a close photo of the control board.
  • The remote and the receiver, with the number of remotes you have.
  • The gate type, width and leaf count.
  • What the gate does, and whether there was a power cut or a storm.

Frequently asked questions

Can I buy a gate motor board without knowing the model?

It is risky. Boards are model and sometimes version specific, and a wrong board may power up and still behave badly or fail. Photograph the board and the motor label first. If the label is gone, a technician can trace the wiring and the motor type to identify the unit before anything is ordered.

Will any remote work with my gate?

Usually not. Remotes belong to a radio system, and your receiver must be able to learn them. A same brand remote may still not match an older receiver. Photograph both and send them to us, or to your supplier, before buying. A cheap remote that fails to pair wastes a trip.

Why do gate boards fail after a power cut in Dubai?

Power cuts and surges can damage the electronics, and heat inside the control box makes them more likely to fail. Water or humidity on the board speeds corrosion. Ask about a surge protector and a sealed, dry control box when you replace the board. These reduce risk but do not remove it.

Is it worth repairing an old gate motor?

Sometimes. If the gearbox and mechanics are sound and the fault is a board or receiver, a repair can be sensible. If the motor is noisy, worn and the model is out of production, a new motor may be the better use of money. A technician can judge this on site after testing.

Can you service a gate motor with no label?

Often yes, but it takes longer. We read what is left, trace the wiring, test the behaviour and write down what the unit is and what it needs. The advice stays honest, because we say clearly when a part cannot be matched. Send photos of every part you can see.

How do I know whether my gate needs a part or only an adjustment?

Try the basics first. Clean the photocell lenses, release the motor and move the gate by hand to check for stiffness, and test a second remote. If the gate stays stiff or the fault returns, stop and call a technician. Many gate faults are adjustment or alignment, not a failed part.

Ready to identify your gate motor and find the part?

Call +971 50 494 8667 or use the quote form. Send the label, board and remote photos through send a photo, or book a free site visit. We cover Dubai villas, compounds and yards, with jobs in other emirates booked by appointment.

Want this done properly?

Send a photo of your door or gate and we will tell you what we see.

Get a quote

  • Quote from a photo

    One photo of the opening and one of the motor. We reply with questions or a price range, then book a free visit.

    Send a photo
  • Door or gate not working?

    Pick what it is doing. You get a safe first step and the fastest way to book a repair.

    Open the fault finder
  • Checklists before we visit

    Short guides from the technicians: what to check, what to photograph, what to ask a supplier.

    Get the checklists

01Services

Every door, gate and barrier we look after

Supply, installation, repair and maintenance, from one team. Pick the family that matches what you have.