Skip to content

DubaiMon,Tue,Wed,Thu,Fri,Sat 09:00 to 18:00

+971 50 494 8667 WhatsApp info@meautodoors.com

Case study

Garage Door Installation in The Meadows, Dubai

The Meadows, DubaiAutomatic Garage DoorsSectional Doors

Mount Everest Automatic Doors installed a white raised-panel sectional garage door in The Meadows, Dubai.

Garage Door Installation in The Meadows, Dubai
The Meadows, Dubai

What we did

Our team carried out a garage door installation in The Meadows, Dubai. The photo shows the work at an advanced stage, with the new door in place and the site still set up. A white sectional door with raised rectangular panels fills the garage opening of a cream painted villa, with a thin black seal visible at the sides. On the paving in front are stacked aluminium profiles, a Makita tool case, a water bottle and packaging, which show how the installation was carried out on site. Sectional garage doors lift in horizontal panels that curve onto overhead tracks, which makes them a practical choice where there is little space in front of the garage. A normal installation covers the tracks, the panels and hinges, the spring system, perimeter seals and the opener. Careful levelling of the tracks and correct spring balance are what give a door its smooth, quiet movement. Owners can do some basic checks between services. Wipe dust and sand from the tracks, watch that the panels close evenly without a gap on one side, and check that the remote and wall control respond every time. If the door shakes, drifts to one side or makes grinding noises, stop using it and call for service, since springs and cables are under high tension. Before the door is handed over, the installer normally checks that the opening is level, that the panels close tightly against the seals and that the opener stops at the right points. Taking a minute to open and close the door a few times with the owner is part of a good handover. Our team at Mount Everest Automatic Doors works from the opening outwards: check the structure, fit the hardware, connect the drive, then adjust and demonstrate the result to the owner. We keep the site tidy as we go and explain how to use the controls and what to look out for later. If you are planning something similar, get in touch and we will talk through what suits your property.

How a job like this runs

  1. 1
    Enquiry

    Call us or message on WhatsApp.

  2. 2
    Photo of the opening

    Send a photo and the rough width and height.

  3. 3
    Site visit

    We visit and measure the opening.

  4. 4
    Written quote

    You receive the scope in writing.

  5. 5
    Installation

    We fit, adjust and test the door or gate.

  6. 6
    After-care

    Servicing and repairs after handover.

01Selected work

More work like this

All projects

02Services

More we do besides this

Supply, installation, repair and maintenance, from one team. Pick the family that matches what you have.

  • Quote from a photo

    One photo of the opening and one of the motor. We reply with questions or a price range, then book a free visit.

    Send a photo
  • Door or gate not working?

    Pick what it is doing. You get a safe first step and the fastest way to book a repair.

    Open the fault finder
  • Checklists before we visit

    Short guides from the technicians: what to check, what to photograph, what to ask a supplier.

    Get the checklists

Tell us about the door or gate.

+971 50 494 8667

Call, message us on WhatsApp, or leave your number and we will call you.

What is it?

Prefer WhatsApp? Message us instead