Skip to content

DubaiMon,Tue,Wed,Thu,Fri,Sat 09:00 to 18:00

+971 50 494 8667 WhatsApp info@meautodoors.com

Case study

High Speed Door Installation in Dubai Industrial City

Dubai Industrial CityHigh Speed Doors

Mount Everest Automatic Doors installed a blue fabric high speed door at a facility in Dubai Industrial City (DIC), Dubai.

High Speed Door Installation in Dubai Industrial City
Dubai Industrial City (DIC), Dubai

What we did

Our team installed a high speed door at a facility in Dubai Industrial City (DIC), Dubai. The door separates a loading area from a production hall where goods and people move through all day. The photo shows a blue fabric roll up door in a steel frame with a stainless head box above it, and a clear vision panel that lets staff see the hall beyond. A small control panel is mounted on the wall at the right, and shrink wrapped pallets of boxes stand beside the opening. A high speed door is a flexible fabric roll up door designed for busy openings between production areas, warehouses and loading zones. It opens and closes much faster than a standard door, which helps keep temperature steady and reduces dust and traffic delays. A typical installation includes fixing the side frames, mounting the drive and head box, hanging the fabric curtain and wiring the control panel and safety sensors. Before any installation, the opening is normally measured, the structure is checked for a solid fixing surface, and the power supply and access for controls are confirmed. After fitting, the equipment is run through full cycles, the limits and safety devices are set, and the owner is shown how to operate it and how to release it manually if needed. Owners should keep the curtain clean, check the bottom edge and the safety sensors, and make sure forklift drivers know how the door detects obstacles. A high speed door that is opening slowly or reversing without cause needs a sensor or drive check, and a minor curtain tear is best dealt with before it grows. Good access to the equipment, clear communication and tidy work matter as much as the parts themselves. Customers across the UAE depend on doors, gates and shutters working every day in heat, dust and humidity, so planning for regular servicing is a sensible habit that protects both the equipment and the people who use it. Our team at Mount Everest Automatic Doors, Dubai, works on site to check the opening, agree the solution with the owner, carry out the work and test the equipment before leaving. If you have a similar door, gate or shutter in Dubai Industrial City (DIC), Dubai, you can contact Mount Everest Automatic Doors, Dubai, for an assessment.

How a job like this runs

  1. 1
    Enquiry

    Call us or message on WhatsApp.

  2. 2
    Photo of the opening

    Send a photo and the rough width and height.

  3. 3
    Site visit

    We visit and measure the opening.

  4. 4
    Written quote

    You receive the scope in writing.

  5. 5
    Installation

    We fit, adjust and test the door or gate.

  6. 6
    After-care

    Servicing and repairs after handover.

01Services

More we do besides this

Supply, installation, repair and maintenance, from one team. Pick the family that matches what you have.

  • Quote from a photo

    One photo of the opening and one of the motor. We reply with questions or a price range, then book a free visit.

    Send a photo
  • Door or gate not working?

    Pick what it is doing. You get a safe first step and the fastest way to book a repair.

    Open the fault finder
  • Checklists before we visit

    Short guides from the technicians: what to check, what to photograph, what to ask a supplier.

    Get the checklists

Tell us about the door or gate.

+971 50 494 8667

Call, message us on WhatsApp, or leave your number and we will call you.

What is it?

Prefer WhatsApp? Message us instead